top of page

Elite Upkeep - January 2026 Pool Reset Season

  • Writer: David Hecht
    David Hecht
  • Jan 22
  • 2 min read

January’s cooler temperatures and slightly reduced pool use create one of the best windows of the year for meaningful pool inspection and preventative care without guest disruption.


After peak season, pools have absorbed heavy swimmer loads, longer pump runtimes and sustained chemical demand. While water may still look clear, this is often when wear shows up in the details, not in obvious failures.


In Curaçao’s climate, pools don’t rest. This January, however, with its cooler temperatures, there’s an opportunity for owners to slow down, look closely and correct small issues before they become expensive ones.


Pool issues rarely fail dramatically. They creep in quietly: loosened tiles, early corrosion, uneven water chemistry, small leaks or lighting issues that only become noticeable once usage increases again. Addressing these items now protects both guest experience and long-term infrastructure and is far more cost-effective than mid-season fixes.


What Homeowners Should Examine Now

Pool Structure & Surfaces

  • Inspect coping tiles for looseness, hairline cracks or shifting

  • Check waterline tiles for calcium buildup, staining or grout erosion

  • Look for early surface pitting or rough patches that can worsen with heat


Lighting & Electrical

  • Test all underwater and perimeter pool lights

  • Check for flickering, moisture inside housings or corrosion around fixtures

  • Confirm timers and switches are functioning correctly and safely


Waterline & Circulation

  • Review water level consistency to spot slow leaks

  • Inspect for cracked skimmers and return jets for blockages or uneven flow

  • Check drain covers and fittings for secure placement


Equipment & Systems

  • Inspect pumps and filters for unusual noise or vibration

  • Check salt systems or chlorinators for scale buildup on cells

  • Confirm timers are aligned with current usage patterns


Decking & Safety

  • Examine deck joints and expansion gaps for cracking or separation

  • Check for slippery areas or algae growth where shade and moisture linger

  • Inspect ladders, handrails and fasteners for early corrosion


Owner Takeaway

January is an opportunistic time for pool management. Quiet inspection now when pools are under less pressure, assures fewer visible problems later, protects equipment life and ensures the pool remains an asset rather than a liability as temperatures rise again. Preventative pool care doesn’t announce itself to guests but they’ll 100% feel the difference.

Comments


bottom of page